Technical support技术支持

复合井盖的四项安装事项

发布时间:2016.10.08;阅读次数:3463次

如今随着技术的不断发展,复合井盖作为市政和建筑的常用材料得到了快速的发展,下面给大家讲一下复合井盖的安装注意事项:


一、复合井盖的砖砌体砌筑,应按照设计院设计的复合井盖尺寸确定其内径或者说长X宽、方圆,也可相应参照标准执行,并在复合井盖外围浇铸宽为40cm的混凝土保护圈,保养期要在10天以上。


二、在沥青路面上安装复合井盖时,一定要注意避免施工机械直接碾压井座,在路面整体浇铸时,应予在路面预留比井座略大的孔,在沥青铺完后安置。


三、混凝土将井座浇铸或沥青铺设后,应及时将复合井盖打开清洗,避免砂浆或沥青将检查复合井盖与座浇成一体,以免影响日后开启。


四、为保持盖外表的美观,表面花纹和字迹的清晰,以沥青路面施工时应用簿铁皮或木板覆盖在复合井盖上,黑色复合井盖也可用废机油等刷涂盖面,防止沥青喷在复合井盖上。


时间在变,唯有不变的是一流的产品,领先的技术和我们诚挚的心,我们将在产品和产品质量方面不懈努力,不断创新!


Today, with the continuous development of technology, as commonly used materials composite covers municipal and construction has been rapid development , for everyone to talk about the following precautions composite covers the installation of :


First, the composite covers brickwork masonry, shall determine its internal diameter or length X width in accordance with the Design Institute of composite covers size, radius , but also the corresponding reference standards and 40cm wide cast concrete perimeter protection in composite covers circle maintenance period to more than 10 days.


Second, when installing composite covers on the asphalt pavement, construction machinery must be taken to avoid direct rolling Wells Tower , the whole cast in the road , and should be well on the road reserved seat slightly larger than the hole in the asphalt Puwan placement.


Third, cast concrete or asphalt will be laid wells seat , it should be promptly cleaned composite covers open , avoid pouring mortar or asphalt will check composite covers and seat into one, in order to avoid turn-on .


Fourth, the beautiful cover to maintain the appearance of the surface patterns and writing clear , when applied to asphalt pavement construction book covering the metal or wood composite covers , black composite covers can also be used to cover up the waste oil and other brush to prevent asphalt sprayed composite covers on .


Time is changing, the only constant is the first-class products , leading technology and our sincere hearts, we will make unremitting efforts in product and product quality , innovation !